1 in stock
Please note, this is a 30mbar system, 50mbar only on request!
Identical in construction to article HEAT2000 but additionally it can be operated at 230V
The perfect replacement for your old Eberspacher heater. Safer, smaller and more efficient.
The Propex is a 1.9 kW heater that switches off automatically when there is gas in the cabin
Thanks to its thermostat, it ensures a pleasant temperature at any time of day or night.
It can be installed inside the vehicle (under the bench/bed) or outside the vehicle.
In the case of an outdoor installation, a protective enclosure must be provided to improve the start-up on very cold days and to protect the Propex from the weather.
The unit is supplied ready for installation, with all necessary cables and couplings.
Features
Heat input: 2.1kW
heating capacity: 1,9 kW
voltage 12V (24V on request)
power consumption: 1,4A
Air flow rate 60 cfm (cubic feet per minute), approx. 1828.8 cm3/min
propane gas at 37 mbar
butane gas at 28/30mbar
Gas consumption: 142 grams/h
320mm long x 172mm wide x 100mm high
Attention: Do not cut the gas exhaust hoses or the air intake hoses.
If the vehicle is not used for a long period of time, the plug should be disconnected or the battery disconnected.
No maintenance is required, but it is recommended to start the heater regularly (3 or 4 times in summer).
The heater is supplied with a gas coupling for a flexible hose. For an installation with rigid hoses or pipes, you must use the coupling with reference SK100846.
