3 in stock
SAFETY DATA SHEET TO DOWNLOAD BELOW, TECHNICAL DOCUMENTATION SECTION
Sika® Remover-208. solvent-based cleaning agent for heavily soiled, non-porous surfaces. It is a colourless, clear solvent-based cleaner for painted substrates.
It is also used to remove uncured Sikaflex® adhesives and sealants from equipment and tools or other products.
Removes heavy soiling
Can be used on most painted surfaces and plastics
Available as 400ml spray can
Application
This product is only suitable for experienced users!
To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the relevant conditions.
Application information
Removal of uncured material
Remove most of the Sikaflex® residue with a knife or spatula. Then dampen a rag or cloth with Sika® Remover-208 and wipe off any remaining adhesive or sealant.
Surface cleaning
Wipe the painted surface with a cloth moistened with Sika® Remover-208. Dampen the cloth by pouring the liquid over it. Never immerse the paper towel in Sika® Remover-208,
as this may cause soiling of the cleaner. Wipe the surface with the dampened paper towel. To maintain the cleaning power, fresh cloths should be used regularly.
Wipe the surface with a clean, dry, lint-free paper towel before the cleaner dries (evaporates).
Repeat the last two steps until no more contamination is visible on a white paper towel.
Do not use Sika® Remover-208 on sensitive surfaces such as fresh paint.
Tightly close the container immediately after each use.
