2 in stock
The Torque Multiplier tool (aka Torque-Meister, Torque-Dude) allows you to break loose (or tighten) those stubborn axle nuts and flywheel gland nuts (36mm) with ease using just a 11mm socket on a 3/8″ drive torque wrench!
With the additional leverage, 33.9 Nm (25 ft/lb) from your torque wrench delivers 305 Nm (225 ft/lb) to the rear axle nut, and 40.7 Nm (30 ft/lb) delivers 366 Nm (270 ft/lb) to the flywheel gland nut.
Includes 2 pinion gears for use with both 6V-180mm, and 12V-200mm flywheels. Fits both 4×130 and 5×205 disc or drum brakes.
NOTE: Stock 12mm lug bolts are not compatible (too short). We recommend at least 15mm of thread using a longer bolt or stud and nut combination.
