2 in stock
Improve the braking performance of your Split window bus by converting the front brakes from drum to discs with this top quality EMPI brake kit. Can be used with standard 14″ steel wheels. The kit only fits LHD buses.
IMPORTANT: for fitting on a Split window bus you need to add the aluminium spacer item no. SK102904 (sold separately).
This kit won’t work with dropped spindles. Step-by-step instructions are included.
You must use DOT3 brake fluid only.
The kit features heavy duty brake caliper brackets that bolt directly to your stock spindles and a 5x205mm disc brake rotor that accepts the stock 14×1.5mm lug bolts.
All you need for the conversion is included: a new master cylinder with reservoir, front brake hoses, bearings, seals, grease caps, a residual pressure valve and all necessary installation hardware including Loctite and wheel studs if you are not running stock wheels.
The EMPI Type 2 Disc Brake Conversion Kit will clear stock Bus 14″ VW wheels, and most all stock and aftermarket 15″ and larger wide 5 VW wheels. Some cap clearancing may be needed on aftermarket wheels.
The disc brake conversion kit will narrow the front track width 2.8mm. The master cylinder does not have a residual pressure valve so the kit includes an inline check valve and a brake line to be used for the rear drum brakes.
The EMPI VW Type 2 Disc Brake Conversion Kit Includes:
2 – Inner Wheel Bearings and Races (Races preinstalled in rotor)
2 – Inner Grease Seals
2 – Outer Wheel Bearings and Races (Races preinstalled in rotor)
2 – Wheel Bearing Thrust Washers
2 – Spindle Lock Nuts
2 – Left & Right Grease Caps
2 – Brake discs
10 – M14x1.5 Lug Studs
2 – Left & Right Calipers
2 – Left & Right Caliper Brackets
8 – M10x1.5×25 Caliper Bracket Bolts
8 – 3/8″ Hardened Flat Washers
4 – M12x1.5×40 Caliper Mounting Bolts
4 – Caliper Bolt Dust Covers with installation tool
2 – 355mm Flexible Brake Hoses
4 – Disc Brake Pads with adhesive backing plates
1 – Residual Check Valve
1 – 7.5″ Steel Brake Line
1 – Caliper Hardware Kit
1 – Master Cylinder (ATTENTION sold without boot, to be purchased separately with part no. 211611195C)
1 – Master Cylinder Reservoir
1 – Caliper Bolt Dust Cover Installation Tool
1 – Loctite 430
